With pinball making a substantial resurgence across the nation, Gentle Giant wishes to make certain that these classic, stunning machines stay damage-free while being carried. Oh, and we want individuals moving them to be safe, too.
Initially glance, pinball devices can appear frightening to move because of their fragility, size, and weight. Luckily, our skilled Giants have a few techniques up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox
The majority of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either 2 or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State machines.
Later makers have hinges and utilize a latching system to keep the headbox upright. There might likewise be two bolts inside as added security, in case the lock is broken or accidentally un-latched.
For Electro-Mechanical pinball devices, you require to remove the headbox rear access panel to acquire access to the bolts and plugs within. Usually this panel has a lock on it to keep it in place, however with time the key may have been lost. On a regular basis, there is a screw keeping this panel in place.
When within, remove the bolts and unplug the large adapters that have wiring going down into the device. You might wish to label these ports to put them back in the ideal area, but they ought to be various sizes, making it hard to plug back incorrectly.
You can now eliminate the headbox totally, or fold the headbox down onto the playfield glass. Make certain you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Strong State Pinballs
For early Solid State Pinballs, you will need to eliminate the back glass. There is a lock situated on the headbox in among three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the center.
As soon as opened, remove the back glass by lifting it up utilizing the lift channel (at the bottom of the glass), then pull it out from the bottom.
Then, open the back box lamp panel by lifting the lock situated on either the left-hand side or right-hand side. The panel can now swing out to you, and offer you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs need you to lift up the lamp panel in order to swing it open.
Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the maker. You may wish to label these plugs to put them back in the best area. You might not have to remove the plugs, as the electrical wiring must be long enough to permit the headbox to be folded down.
At this moment, you can lock up the lamp panel and replace the back glass.
Modern Strong State Pinballs
For Data East, Sega, and Stern Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the supplied key, turn the latch 90 ° counter-clockwise.
For Williams, Bally, and Gottlieb, you can easily unlatch the back box at the back of the device. This is a basic setup and needs no tools.
If you can now fold down the head box onto the cabinet, you're done. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the moving pinball machine back glass in location.
If you can not fold the head box down, then you have to get inside. There is a lock situated at the top of the back glass in the center. Utilize the supplied key to unlock, and remove the back glass by lifting it up from the bottom, and after that pulling it out from the bottom.
Next, you will have to eliminate the screen panel. You can do this by raising it up and out. Open the light panel. There will be a lock located on either the right-hand or left-hand side. (Some newer Williams and Bally pinballs do not have a separate amp panel, it belongs to moving specialty items the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).
Get rid of the more info 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.
Pinball Device legs are held in place by eight bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.
These threaded plates and captive nuts can be harmed, and the usage of additional nuts might have been needed. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.
With the front door (coin door) open, move the lock down bar lock throughout and eliminate the lock down bar. Move out the playfield glass, and put in a safe location. Next, lift up the playfield by putting your hand where the ball drains, and lift the playfield up.
You ought to now have access to any nuts that may have been used. When any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.
Be sure to mark or remember which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.
You are now ready to transport your pinball maker. Prior to you fill it, make certain you get rid of the pinballs so they do not bounce around throughout transportation.
If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to packing the device. Get a good friend to have and assist among you supporting the pinball, while the other eliminates the front legs. Slide the device in, and then remove the back legs. It is a lot easier to load the machine front initially.
Make sure you strap the pinball in, as you do not want it moving if you have to stop unexpectedly!
For Electro-Mechanical pinball makers, you require to eliminate the headbox rear gain access to panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).
If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to loading the maker. Get a pal to have and help one of you supporting the pinball, while the other removes the front legs.